Media and Additional Parts
Description
Decal, CE
Ignition key
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator video
Pre-delivery check list
Certificate of compliance
Note: Determine the left and right sides of the machine
from the normal operating position.
1
Installing the Wheels
Parts needed for this procedure:
2
Front wheel assemblies
1
Rear wheel assembly
Procedure
1. Mount a wheel assembly onto each wheel hub (valve
stem outward).
Important: The rear tire has a narrower rim
than the front tires.
2. Install lug nuts and torque to 45 to 65 ft-lb (61 to
88 N-m).
Qty.
Affix to the machine over corresponding English decals
6
for European compliance.
2
Start the engine.
1
Read before operating the machine.
1
1
Use to look up and order parts.
1
View before operating the machine.
Check to ensure that the machine has been properly set
1
up.
1
Ensure CE compliance.
2
Installing the Steering Wheel
Parts needed for this procedure:
1
Steering wheel
1
Steering wheel cap
1
Large washer
1
Jam nut
1
Screw
Procedure
1. Slide the steering wheel onto the steering shaft
(Figure 3).
1. Steering wheel
2. Washer
2. Slide the washer onto the steering shaft (Figure 3).
13
Use
Figure 3
3. Jam nut
4. Cap