Specifications; Attachments/Accessories; Operation; Checking The Engine Oil Level - Toro 03206 Operator's Manual

Specifications

Note: Specifications and design are subject to change without notice.
Engine
Cooling System
Electrical
Fuel Capacity
Traction Drive
Hydraulic System
Ground Speed
Tires/Wheels
Frame
Steering
Brakes
Controls
Gauges & Protective
Systems
Cutting Unit Lift

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
Kubota three cylinder, 4 cycle liquid cooled diesel engine. 21.5 hp @ 2500 rpm Governed to 2650 rpm.
68.5 cu. in. (1124 cc) displacement. Heavy duty, 2-stage, remote mounted air cleaner. High water
temperature shutdown switch.
Radiator capacity is approximately 6 qts. of 50/50 mixture of ethylene glycol anti–freeze. Remote
mounted 1 qt. expansion tank.
12 volt Group 55, 450 cold cranking amps at 0F (–18C), 75 minute reserve capacity at 80F (27C). 40 amp
alternator with regulator/rectifier. Seat switch, PTO, parking brake and traction interlock switches.
7.5 gallons
High torque hydraulic wheel motors. 3–wheel drive. Oil cooler and shuttle valve provide positive
closed–loop cooling.
Remote mounted, 3.5 gallon oil reservoir. 10 micron remote mounted spin on filter.
Infinitely variable speed selection in forward and reverse Mowing speed: 0–6 mph (adjustable) Transport
speed: 0–9 mph Reverse speed: 0–3.5 mph
Front tires are 20 x 12–10 tubeless tires and rear tires are 20 x 10–10 tubeless. All have 4–ply rating with
demountable rims. Recommended tire pressure: 14–18 psi front and rear tires.
Tricycle vehicle with 3–wheel traction drive and rear wheel steering. Frame consists of formed steel,
welded steel and steel tubing components.
Power steering
Service braking accomplished through dynamic characteristics of Hydrostat. Parking or emergency brake
is actuated by ratchet hand lever on the operator's right hand side
Foot operated forward and reverse traction pedals and Mow/Transport slide. Hand operated throttle,
ignition switch, reel engagement switch, reel unit lift and shift lever, parking brake and seat adjustment.
Shift lever only on Model 03206.
Hour meter. 4 light warning cluster gauge: oil pressure, water temperature, amps, glow plug and side hill
angle indicator.
Hydraulic lift with automatic reel shut off.

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Checking the Engine Oil Level

Service Interval: Before each use or daily
The engine is shipped with oil in the crankcase;
however, the oil level must be checked before and after
the engine is first started.
Crankcase capacity is approximately 4 qt. (2.8 l) with
the filter.
Use high-quality engine oil that meets the following
specifications:
• API Classification Level Required: CH-4, CI-4 or
higher.
• Preferred oil: SAE 15W-40 (above 0ºF (-17ºC))
• Alternate oil: SAE 10W-30 or 5W-30 (all
temperatures)
25