104-5181
1. Warning—read the Operator's Manual.
2. Tipping hazard—do not drive on slopes greater than 15
degrees and, if the roll bar is installed, wear the seat belt.
3. Thrown object hazard—keep bystanders a safe distance
from the machine.
4. Cutting hazard of hand or foot—stay away from moving
parts.
5. Warning—lock the parking brake, stop the engine, and
remove the ignition key before leaving the machine.
1. Engage the power take off
(PTO).
2. Disengage the power take
off (PTO).
3. Lower the cutting units.
4. Move the cutting units to
the right.
CE only
5. Raise the cutting units.
6. Move the cutting units to
the left.
7. Move rear ward to lock the
lift lever.
8. Engine—stop
104-5192
Model 03207 only
9. Engine—run
10. Engine—start
11. Fast
12. Continuous variable setting
9
13. Slow