the body away from the cutting units, attachments, and
any moving parts. Keep everyone away.
•
Check brake operation frequently. Adjust and service as
required.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks, and
flames away from the battery.
•
The engine must be shut off before checking the oil or
adding oil to the crankcase.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115-149 N-m (85-110 ft-lb).
1. Height of cut adjustment
1. Low height of cut
adjustment
93-7818
100-5622
100-5623
2. High height of cut
adjustment
•
If major repairs are ever needed or if assistance is desired,
contact an Authorized Toro Distributor.
•
To make sure of optimum performance and continued
safety certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts
and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
Engine Emission Certification
The engine in this machine is EPA Tier 4i compliant.
1. Height of cut
1. Crushing hazard, hand—read the instructions before
servicing or performing maintenance.
7
117–2718
106-4250
93-6674