Maintenance; Recommended Maintenance Schedule(S) - Toro 31598 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 250 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 250 hours
Every 500 hours
Every 1,000 hours
Every 2,000 hours
Every 2 years
Maintenance Procedure
• Torque the wheel lug nuts.
• Check the alternator belt tension.
• Check the compressor belt tension.
• Check blade bolt torque
• Adjust the valve clearance
• Change the front planetary gear oil.
• Check the tire pressure.
• Lubricate castor arm bushings.
• Check the engine oil level.
• Drain the water separator
• Check the coolant level.
• Check the hydraulic fluid level.
• Check mower blade condition
• Check the safety interlock switch operation
• Lubricate all grease fittings.
• Remove air cleaner cover and clean out debris Do not remove filter.
• Check the battery condition
• Inspect the blade drive belts.
• Check the hydraulic filter service indicators (2)
• Check blade bolt torque
• Clean the air conditioning screen. (Clean more frequently in extremely dusty or
dirty conditions)
• Remove all debris and chaff from the engine compartment, radiator and oil cooler.
• Inspect the cooling system hoses.
• Torque the wheel lug nuts.
• Change the engine oil and filter.
• Check the planetary gear drive oil level
• Service the spark arrestor.
• Clean the cab air filters. (Clean more frequently in extremely dusty or dirty conditions
and replace them if they are torn or excessively dirty.)
• Clean the air conditioning coil. (Clean more frequently in extremely dusty or dirty
conditions)
• Inspect the fuel lines and connections.
• Replace the fuel/water separator element.
• Replace the fuel filter element
• Inspect the cutting unit castor wheel assemblies.
• Drain and clean the fuel tank.
• Recalibrate traction pedal
• Change the front planetary gear oil.
• Check the rear wheel toe-in.
• Check the alternator belt tension.
• Check the compressor belt tension.
• Replace the drive blade belts
• Change the hydraulic fluid and filters.
• Adjust the valve clearance
• Flush the cooling system and replace fluid.
• Replace moving hoses.
40