Important: Do not rotate the bypass valves more
than 1 turn. This prevents the valves from coming
out of the body and causing fluid to run out.
1. Bypass valves
5. Release the parking brake before pushing the machine.
Changing to Machine Operation
Rotate each bypass valve clockwise 1 turn and hand tighten
them. Torque them to approximately 8 N∙m (71 in-lb); refer
to
Figure
20.
Note: The machine does not drive unless the bypass valves
are tightened. Do not overtighten the bypass valves.
Hauling the Machine
•
Use care when loading or unloading the machine into a
trailer or a truck.
•
Use full-width ramps for loading the machine into a
trailer or a truck.
•
Tie the machine down securely using straps, chains, cable,
or ropes. Both front and rear straps should be directed
down and outward from the machine.
Figure 20
1. Front tie-down
25
Figure 21
2. Rear tie-downs