Electrical Output Terminals; Storage Compartment/Tools; Seat Belts; Occupant Side Restraints - Toro UTV500AAC00000 Operator's Manual


NOTE: Extra fuses are located
inside the fuse cover.
Electrical Output
Terminals
Two output terminals for electrical acces-
sories are located on the front and rear
wiring harnesses.

NOTE: The rear output terminal is
located near the left-side of the
throttle body. The front output termi-
nal is located beneath the dash-
board in front of the left-side
accessory plug.
Two accessory plugs are located on the
dashboard. These plugs are always on
and are not switched off with the ignition
switch.
CAUTION
Always use electrical accessories
less than 180W.
Storage Compartment/
Tools
This vehicle has a storage compartment
within the dashboard.
A basic tool kit located under the seat
(passenger side) is provided with this
vehicle. Maintain the tool kit with the
vehicle at all times.
TC035

Seat Belts

Inspect the seat belts for frayed or torn
edges. Check that the belts extend and
retract smoothly and fully without binding
or catching. Check that the latch plate locks
securely in place in the buckle and releases
when the button is pressed. Wash off any
dirt and make sure the retractors are free of
debris. Do not grease or oil the retractors.

Occupant Side Restraints

Inspect the occupant side restraints for
frayed edges, cuts, or separation of seams.
Wash off any dirt and make sure the latch
straps lock securely into the foot restraints
with straps taut.
PR049A

ROPS

Inspect the Rollover Protection Structure
(ROPS) for any deformation, twisting, crack-
ing, missing or damaged fasteners, loose fas-
teners, modification to the production form,
missing ROPS label, unauthorized repair or
welding, and/or improper installation. If any
of these circumstances are discovered, imme-
diately bring the vehicle to an authorized
Toro ROV dealer for service.
TC032
HDX187
51