Hauling the Machine
•
Use care when loading or unloading the machine into a
trailer or a truck.
•
Use full-width ramps for loading the machine into a
trailer or a truck.
•
Tie the machine down securely using straps, chains, cable,
or ropes. Both front and rear straps should be directed
down and outward from the machine.
Locating the Tie-Down Points
There are tie downs located at the front and rear sides of the
machine
(Figure
31).
Note: Use properly-rated DOT-approved straps in 4 corners
to tie down the machine.
•
2 on the front of the operator's platform
•
Rear bumper
1. Rear tie-down point
Figure 31
2. Front tie-down points
33