Hour Meter; Ignition Switch; Engine Oil Pressure Light - Toro 04384 Operator's Manual

Hour Meter

The hour meter (Figure 17) indicates the total hours the
machine has operated. It starts to function whenever the key
switch is rotated to On.

Ignition Switch

Insert the key into the switch
as far as possible to the Start position to start the engine.
Release the key as soon as the engine starts; the key will move
to the On position. Turn the key counterclockwise to the Off
position to stop the engine.
Steering Arm Locking Lever
Rotate the lever (Figure 17) rearward to loosen the adjustment,
raise or lower the steering arm for operator comfort, then,
rotate the lever forward to tighten the adjustment.
Water Temperature Light
The light (Figure 17) glows and the engine automatically shuts
down when the engine coolant temperature gets too high.

Engine Oil Pressure Light

The light (Figure 17) glows if the engine oil pressure drops
below a safe level.
Battery Warning Light
The light (Figure 17) glows if the battery charge is low.
Glow Plug Indicator Light
When the glow plug indicator light
indicates the glow plugs are on.
Raise/Lower Mow Control
Moving the control (Figure
lowers the cutting units and starts the reels. Pull back on the
control to stop the reels and raise the cutting units. During
operation the reels can be stopped by pulling back on the
control momentarily and releasing it. Start the reels by
moving the control forward.
High Temperature Override Button
If the engine kills due to an overheating condition, press the
override button (Figure 17) in and hold it until the machine
can be moved to a safe location and allowed to cool down.
Note: When using the override button, it must be held down
continuously to operate. Do not use it for extended periods
of time.
(Figure 17) and turn it clockwise
(Figure 17) is lit, it
17) forward during operation
Backlap Lever
Use the backlap lever
raise/lower mow control lever and the reel speed control for
backlapping the reels.
1. Backup lever
Reel Speed Control
Use the reel speed control
the reels.
Seat Adjusting Lever
The seat adjusting lever on the left side of the seat
allows a 18 cm (7 inch) fore and aft adjustment.
1. Seat adjusting handle
22
(Figure 18) in conjunction with the
Figure 18
2. Reel speed control
(Figure 18) to adjust the RPM of
Figure 19
(Figure 19)