Towing the Machine
In case of an emergency the machine can be towed for a short
distance 400 m (less than 1/4 mile). However, Toro does not
recommend this as standard procedure.
Important: Do not tow the machine faster than 3–5
km/h (2–3 mph) because the drive system may be
damaged. If the machine must be moved a considerable
distance, transport it on a truck or trailer.
1. Locate the bypass valve on the pump and rotate it so
that the slot is vertical
1. Bypass valve—slot shown in closed (horizontal) position
2. Before starting the engine, close the bypass valve by
rotating it so that the slot is horizontal
Important: Do not start the engine when the
valve is open.
(Figure
33).
Figure 33
(Figure
33).
33