Table of Contents
Advertisement
Subnet Mask Registration (Option 15)
When the DHCP is not supported, the Subnet Mask registration is also required
in order to operate the telephone. To register the Subnet Mask address,
follow the steps below:
1. Press OPTIONS, numeric key "1", "5", then ENTER.
SUBNET MSK REGISTRATION
SN=10.36.213.210
2. Press ENTER.
ENTER USER PASSWORD
3. Enter 4 digits of numeric password (see User Password Registration in
chapter 4). Then ENTER.
ENTER USER PASSWORD
****
* Factory Default User Password - 9999
4. Enter Subnet Mask Address. If Subnet Mask address has been entered
already, the last address is displayed.
ENTER SUBNET MASK
SN=255.255.255.0
In order to input a new Subnet Mask, simply enter the new address. Press
"#" key when the input of a dot (.) is required
Note:
If you don't want to change the Subnet Mask, just press ENTER.
5. Press ENTER.
COMPLETED
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the option
menu.
2
2-5
Advertisement
Table of Contents
