Table of Contents
Advertisement
7. Assign the originating directory number key
This feature works with a complementary switch feature that can be ordered
from your telephone company. This is also called Call Appearance
Reservation. For these features to work properly, both the telephone
and the switch must be properly configured.
The categories, described as "Call Appearance Reservation" status, that
can be selected are listed below:
Originating only: allows certain Directory Numbers or Call Appearances
of Directory Numbers to be used for outgoing calls only.
3
Terminating only: allows certain Directory Numbers or Call Appearances
of Directory Numbers to be used for incoming calls only.
Originating only/Priority Incoming only: allows certain Directory
Numbers or Call Appearances of Directory Numbers to be used for outgoing
calls and for incoming priority calls only.
Non-reserved: may be assigned to lines that have no reservation status.
1. To manually assign the Originating Directory Number key, press 7,
and press ENTER.
2. Press the selected Multi-assign key.
3. Press ENTER. The following display is shown. The option to turn the
selected key ON or OFF is available.
4. Press 1 or 2 to change the current status, then press ENTER. Or press
ENTER to accept the current status.
Note:
If an invalid key is selected for the originating Directory Number, the
following display is shown:
3-14
ORIGINATING DN MODE
SELECT ASSIGN KEY
ORIGINATING DN MODE
ORIG DN=ON
1:ON
2:OFF
ORIG DN = ON
COMPLETED
or
ORIG DN = OFF
COMPLETED
ORIGINATING DN MODE
INVALID SELECTION
(1)
(SELECT 1-2)
(1)
(1)
(XX)
Advertisement
Table of Contents
