Appendix B - Self-Testing; Performing Self-Test - Fujitsu SRS-12I Administrator's Manual

APPENDIX B – SELF-TESTING
The telephone has a self-test mode that performs tests, which include the
following:
• LED test
• Key test (22)
• Tone test (16)
• Ringer test (17)
• LCD test (11)
• Hold Tone Check (18)
• Key Touch Tone test (19)
• Ping test (9)
• DSP Coder Loopback
• MAC Address test (20)

Performing Self-Test

Note:
The set cannot originate or receive calls during the self-test. Enter password
"12345678" then "*". If a mistake is made entering the password, press "#"
key to return to a password input state.
1. Unplug the power cord from the DC power connector.
2. Press and hold down both "1" and "3" simultaneously on numeric keypad
as power is reapplied by plugging the DC jack into the telephone. Keep
them down until the automatic LED test begins.
Test Program
When the LED test is complete, this screen appears:
Test Program
Password:
Test Program
Password: ********
Enter password "12345678" then "*".
Test Program
Password: ********
It is now ready to do the Self-Test
Test Program
V00L0040
V00L0040
V00L0040
V00L0040
B
B-1