Vlan Setting (Option 20) - Fujitsu SRS-12I Administrator's Manual

VLAN Setting (Option 20)

The VLAN Setting is required in order to operate the telephone. To select
the VLAN Setting, follow the steps below:
2
1. Press OPTIONS, numeric key "2", "0", then ENTER.
2. Press ENTER.
3. Enter 8 digits of numeric password (see Administrator Password
Registration in chapter 4). Then ENTER.
* Factory Default Administrator Password - 99999999
4. LCD will display as below:
When you select 2: NO SUPPORT, and ENTER, the LCD will display as
below:
After this message is displayed the telephone will reset and the options
selected above will be implemented
When you select 1: SUPPORT, go to step 5 below.
5. Press 1: SUPPORT, then ENTER.
6. To overwrite, simply enter the new value between 2-4094. Then
ENTER.
2-8
VLAN SETTING
NON SUPPORTED
ENTER ADM PASSWORD
ENTER ADM PASSWORD
********
1: SUPPORT
NON SUPPORTED
COMPLETED
VLAN ID REGISTRATION
ID=2
VLAN ID REGISTRATION
ID=2000
2: NO SUPPORT
(SELECT 1-2)
(SELECT 2-4094)
(SELECT 2-4094)