Table of Contents
Advertisement
3. Re-assign CA button as Directory Numbers, ACO/AFC.
1. Press 1, then ENTER.
CALL APPEARANCE MODE
SELECT ASSIGN KEY
The first button lower left, lights green. The factory default is CACH, CA=1.
2. Press multifunction button 1.
CALL APPEARANCE MODE
CA=1
3. Press, CLEAR then ENTER.
CA=
COMPLETED
Now that CA=1 has been cleared from the first call button. You may now
re-program the first call button as a Directory Number.
4. Press OPTIONS twice to return to the menu options. Press numeric key
"9", then ENTER twice. Press numeric key "2", then ENTER. Press numeric
key "3", then ENTER for the DN selection. The display will now show:
DIRECTORY NUMBER MODE
SELECT ASSIGN KEY
The telephone' s indicators show button status as follows:
• Green indicates a button already assigned as a Directory Number.
• Red indicates a button already assigned as a CA, or as a network
feature or as a local feature such as One-Touch or MIC-OFF.
• Unlit (off) indicates an unassigned button.
5. Press button to be assigned as a Directory Number. (In this case button
1) The following display appears:
DIRECTORY NUMBER MODE
DN=
6. Now on the key pad, press the numbers for the Directory Number to
be entered to the button 1 with area code and 7 digit phone number.
DIRECTORY NUMBER MODE
DN=9198502222
7. Press ENTER.
DN=9198502222
COMPLETED
(1)
(1)
(1)
(1)
(1)
3-11
3
Advertisement
Table of Contents
