Maintenance - Toro 07253TC Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service Interval
After First 8 hours
Every 8 Hours
After First 20 Hours
Every 50 Hours
Every 100 Hours
Every 200 Hours
Every 400 Hours or Yearly
Every 800 Hours or Yearly
1 More often when operating under heavy load or high temperatures
2 More often in dusty, dirty conditions
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Check the engine oil.
• Check the drive belt tension.
• Check the starter belt tension.
• Check the engine oil.
• Check the tire pressure.
• Check the front wheel toe-in at the proper ride
height.
• Check the battery fluid level.
• Check the battery cable connections.
• Change the engine oil (includes synthetic oil).
• Lubricate all grease fittings.
• Clean the engine rotating screen.
• Inspect the air cleaner filter.
• Replace the engine oil filter.
Inspect the brake and parking brake.
• Inspect the condition and wear of the tires.
• Torque the wheel lug nuts.
• Check the front suspension adjustment toe-in
and ride height.
• Replace the air cleaner filter.
• Check the brake cable adjustments.
• Inspect the drive belt.
• Inspect and adjust the starter belt.
• Inspect the fuel lines.
• Replace the fuel filter.
• Change the transaxle oil.
• Replace the spark plugs.
20
1
2
2