Toro 07253TC Operator's Manual page 8

purposes only, not for passengers.
• Never overload your vehicle. The name plate
(located under dash on center column) shows load
limits for the vehicle. Never overload the
attachments or exceed the gross vehicle weight.
Maintenance
• Only qualified and authorized personnel shall be
permitted to maintain, repair, adjust, or inspect the
vehicle.
• Before servicing or making adjustments to the
machine, stop the engine, set the parking brake,
and remove the key from the ignition to prevent
someone from accidentally starting the engine.
• To make sure that the entire machine is in good
condition, keep all nuts, bolts, and screws
properly tightened.
• To reduce the potential for fire, keep the engine
area free of excessive grease, grass, leaves, and
accumulation of dirt.
• Never use an open flame to check the level or
leakage of fuel or battery electrolyte.
• If the engine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of your body away from
the engine and any moving parts. Keep everyone
away.
• Do not use open pans of fuel or flammable
cleaning fluids for cleaning parts.
• Do not adjust the ground speed governor. To
ensure safety and accuracy, have an authorized
Toro distributor check the ground speed.
• If major repairs are ever needed or assistance is
required, contact an authorized Toro distributor.
• To be sure of optimum performance and safety,
always purchase genuine Toro replacement parts
and accessories. Replacement parts and
accessories made by other manufacturers could be
dangerous. Altering this vehicle in any manner
that may affect vehicle operation, performance,
durability, or its use, may result in injury or death.
Such use could void the product warranty.
Sound Pressure Level
This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 80 dB(A) based
on measurements of identical machines per J1174-
MAR 85 procedures.
Vibration Level
This unit does not exceed a vibration level of 2.5 m/s
at the hands based on measurements of identical
machines per ISO 5349 procedures.
This unit does not exceed a vibration level of 2.5 m/s
at the posterior based on measurements of identical
machines per ISO 2631 procedures.
8
2
2