Mitsubishi Electric FX3G User Manual page 192

FX /FX /FX /FX /FX
3S 3G 3GC 3U
FX -2AD-BD (2-channel Analog Input)
3G
• FX Series PLC
3G
*1
2 maximum
including other analog expansion boards,
analog special adapters.
Board B Board A
Analog data
Flowmeter, pressure sensor, etc.
Contents
 Analog data
 Switching of input mode
 Setting of averaging
time
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of
connectable units and to configure the entire system.
*1. Only 1 analog board can be connected to the FX
D-4
PLC User's Manual - Analog Control Edition
3UC
System
Connected to the option connector 1
Connected to the option connector 2
Transfer direction
FX Series PLC
3G
For FX Series PLC
3G
Special devices
M/D8260 to M/D8269
Board A
M/D8270 to M/D8279
Board B
Series PLC (14-point and 24-point type).
3G
1 Outline
1.1 Outline of Functions
Point and section to be
referred to

Number of connectable
units
To check the connectable

PLC model number, refer
to Section 1.3.
For a detailed

description of wiring,
refer to Chapter 3.
 For a detailed description
of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.