Connection Of Special Function Blocks - Mitsubishi Electric FX3G User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U
Common Items
3.3.2

Connection of special function blocks

FX Series PLC
3GC
A C1
• For a detailed description of special function block connectability and system configuration:
• Use the FX
3UC
incorporated in the FX
The analog special function blocks shown in the table below can be connected to the FX
Analog special function blocks for the FX
Analog special function blocks for the FX
Analog special function blocks for the FX
Analog special function blocks for the FX
A-20
PLC User's Manual - Analog Control Edition
3UC
A C
,
(For a detailed description of installation, refer to the
D
C2
FX
3GC
To connect the special adapters
C1
FX -4AD
3UC
C1
Special function
block for FX
2NC
D
or
C1 C2
FX -1PS-5V
3UC
D
FX -CNV-IF
2NC
-1PS-5V (extension power supply unit) if the capacity of the 5 V DC power supply unit
Series PLC is deteriorated.
3GC
FX Series
3U
3UC
2N
2NC
3 System Configuration Drawings of Analog Products
D
, and represent the connecting positions.
Series User's Manual - Hardware Edition.)
A
, refer to Subsection 3.3.1.
C1
FX -4AD
3UC
C1
Special function
block for FX
2NC
C2
Special function
block for
FX /FX
3U 2N
→ Refer to the FX
3GC
→ Refer to the FX
3GC
FX -4AD, FX -4DA, FX
3U 3U
FX -4AD
3UC
FX -8AD, FX -4AD, FX
2N 2N
FX -5A, FX -4AD-PT, FX
2N 2N
FX -4AD, FX -4DA
2NC 2NC
3.3 FX3GC Series PLC
European terminal block
European terminal block
Analog input
Flowmeter
Pressure sensor
Signal converter, etc.
European terminal block
Analog output
Inverter, etc.
Temperature sensor
input
Thermocouple
Platinum resistance
European terminal block
Terminal block
Series User's Manual - Hardware Edition.
Series User's Manual - Hardware Edition.
3GC
Type
-4LC
3U
-2AD, FX -4DA, FX
2N 2N
-4AD-TC, FX -2LC
2N 2N
thermometer
sensor (Pt100)
Series PLC:
-2DA,
2N