Toro 04540 Operator's Manual page 21

4. To set the reel speed, on the InfoCenter open the Main
Menu and scroll down to S
5. In the S menu, scroll down to R
ETTINGS
and use the ± button to set the reel speed to the desired
number.
Machine Configuration Passcode
You can set a passcode on the InfoCenter so that operator's
cannot change the following machine settings without it:
R D , L D
AISE ELAY OWER
S , B S , C
PEED ACKLAP PEED
and C (FOC).
LIP
1. From the S
ETTINGS
2. Set P S
ROTECT ETTINGS
3. When prompted, enter a 4-digit passcode.
4. Turn the ingnition key to O
Note: If you forget the user defined passcode, you can obtain
a temporary passcode from your authorized Toro distributor.
Diagnosing the Fault-Log Indicator
The fault-log indicator icon appears on the main screen in the
event of a fault in the machine. When this icon is present
there is a new log entry in the Faults menu that you or your
distributor can use to identify the problem.
For a list of faults, refer to your Authorized Toro Distributor
or the Service Manual.
Seat-Adjusting Lever
The seat-adjusting lever is located on the front, right corner
of the seat (Figure 18), allowing you to adjust the seat forward
and rearward.
Note: If you need additional adjustment on the seat, you can
remove the 4 bolts securing the seat to the base and move the
seat to the second set of mounting holes provided.
Figure 17
.
ETTINGS
EEL
, T - D , R
ELAY AP OFF ELAY
C , B
LIP ONTROL LADE
menu, select P S
ROTECT
to O .
N
to save the code.
FF
g014736
S
PEED
1. Seat-adjusting handle
Fuel-Shutoff Valve
Close the fuel-shutoff valve
under the fuel tank, when storing or transporting the machine
EEL
on a truck or trailer.
C ,
OUNT
.
ETTINGS
1. Fuel shutoff (under the fuel tank)
21
1
Figure 18
(Figure
Figure 19
g014628
19), behind the seat and
1
g01462 6