KB-3425LS/K/W
KB-4425LS/K/W
WARNING: Follow all safety precautions beginning on Page 2 before proceeding!
. Before removing Control Panel, take measures to protect
the
Cook Top surface and keep Microwave Drawer
open
to prevent scratches.
2. Remove all Control Knobs (Fig 1).
3. Unscrew all Retainers (Fig 1).
4. Unscrew Glass Key Deco screw () (Fig 1).
5. Carefully lift Glass Key Deco and unhook
Indicator Lamp from Lens (Fig 1).
6. Remove all screws from Control Panel Mold (Fig 2).
7. Slide Control Panel Mold to left (to unlock) and lift (Fig 2).
8. Remove Gasket from Key Fixing Angle (Fig 3).
9. Lift Key Fixing Mold and carefully unhook all Molex's,
ground wire and C/P wiring (Fig 3).
NOTE: When reassembling, it is very important
that all Cook Top wires are tucked under the
Microwave cavity lip and secured with the RED
WIRE STRAP. The 240v harness can create
noise that can interfere with C/P function (exam-
ple: intermittent or no keyboard operation).
OVEN / MICROWAVE DRAWER DISASSEMBLY
Glass Key Deco
Gasket
Key Fixing Angle
40
Fig. 1
Lens
Indicator Lamps
Fig. 2
Fig. 3
GND Deco Screw