0. Remove screws from Control Panel Frame (Fig 4).
w
. (KB3425L) - Slide Cook Top forward to unlock from
shoulder screws, then remove or reposition (Fig. 5).
(KB4425L) - Before you can Slide the Cook Top
forward to unlock it from shoulder screws, you must
remove one screw from each right and left slide angle
(Fig. 5A). This is done by removing the (3) screws
holding the back panel to the side panels (Fig. 6), then
carefully swing the back of the side panel out, to gain
access to the screw holding each right and left slide
angle.
Cook Top
2. Remove electrical cover and screws holding the se-
lect
screws
back/side
Slide angle
switch from back plate. Then remove all
on back plate and carefullyremove
panels (Fig. 6).
Control Panel Frame
Fig. 5A
4
KB-3425LS/K/W
KB-4425LS/K/W
Fig. 4
Fig. 5
Fig. 6