Huawei eSpace 6805 Administrator's Manual page 129

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Using the RTP to Analyze 2833 Packets
To use the RTP to analyze 2833 packets, proceed as follows:
1.
2.
3.
Figure 5-80 RTP information
Issue 01 (2012-06-20)
Use the Wireshark to open the bearer network port captured file in .pcap or .cap format.
Enter (rtp) && (rtp.p_type > 34) or rtpevent in the Filter text box.
Press Enter.
All files that are transferred using RFC 2833 in the captured information are filtered out,
as shown in Figure 5-80.
2833 packets use the sampling mode to send a number for multiple times. Numbers are
separated by RTP packets whose Event is TRUE, as shown in
procedure for sending the number 6 is used as an example.
− The message "End of Event: False" in the packet parsing area indicates that the
number 6 has not been sent completely.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
Figure 5-81. The
124