Huawei eSpace 6805 Administrator's Manual page 69

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Figure 5-17 Configuration file template
Table 5-2


Table 5-2 Parameters in the configuration file template
ID
P8
P64
P246
Issue 01 (2012-06-20)
lists the commonly used parameters and their settings.
For parameter description, see
2.2.5 Individual Account Configuration.
When modifying the template, you are advised to comment out unnecessary parameters. If you want
to use these parameters again, delete the comment characters.
Paramete Setting
r Example
IP 0
Address
Time TZY-8
Zone
Self-Defin MTZ+6MDT+5
ed Time ,M4.1.0,M11.1.
Zone 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 2-2 in the 2.2.4 Advanced Configuration
Description
Mode of obtaining the phone's IP address.
 0: Obtain the IP address through DHCP
 1: Use a static IP address.
 2: Obtain the IP address through PPPoE
The default value is 0.
Time zone of a phone.
If the phone is not located in a defined time zone,
set this parameter to customize, and set the P246
parameter at the same time.
The default value is TZY-8.
User-defined time zone including the DST. For
example, MTZ+6MDT+5, M4.1.0, M11.1.0.
MTZ+6MDT+5 specifies the time zone, M4.1.0
specifies the DST start time, and M11.1.0
specifies the DST end time.
 In the parameter value, + indicates that the
time zone is on the west of the Prime Meridian;
- indicates that the time zone is on the east of
the Prime Meridian.
5 Appendix
and Table 2-3 in the
64