Panasonic DMR-E50 Operating Instructions Manual page 20

Marking places to play again-MARKER
CANCEL
RETURN
DISPLAY
MARKER
You can mark positions by pressing [MARKER]. Also use on-screen
menus to mark, recall, and clear positions.
Mark up to 999 positions. The unit records the markers directly onto
the disc and they remain intact even if you remove the disc.
1mqy $i.;:' ::j 2 CD1 -m
**%-,$::-,<.y 1
Mark up to 5 positions. The markers clear when you open the disc
tray.
RQT6920
During play
Press [MARKER].
One marker is added.
Displaying the marker icon
1
During play
Press [DISPLAY].
The on-screen menus appear. (e.g., DVD-RAM)
2 Press [A, V] to select the "Play" and
press [,I.
3 Press [A, V] to select "Marker" and
press [Fj to highlight the first aster-
isk (4).
1mq 1-a lpma g$x<\$ CD] Wf
Marking positions
Press [ 4, .] to select an asterisk (4) and
press [ENTER].
One marker is added.
When marking positions 11 and above
mm
@ Press [d, b] to highlight "l-
10".
@ Press [A, V] to select "1 l-20".
You can select the next group of
10 when the current group is full.
@ Press [b].
The first asterisk is highlighted.
@ Press [ENTER] to mark a position.
Playing from a marked position
Press [4, ,] to select a marker number
and press [ENTER].
Play starts from the marked position.
1 Clearing markers
Press [4, ,] to select a marker number
and press [CANCEL].
An asterisk replaces the number and the position is cleared.
To clear the on-screen menus
Press [RETURN].
Ima
l
You cannot use this feature if:
-the disc's elapsed play time is not shown in the display.
-you are using a play list. m
-protection (cartridge +page 11, disc +page 34) is set
(you can still recall the markers to play a position).
l
Subtitles around markers may fail to appear.
l
Markers are cleared when you finalize DVD-R @page 34).
@Markers on DVD-RAM and DVD-R are ordered by time, so
marker numbers can change when you add and delete them.