Vcr Plus - Panasonic DMR-E50 Operating Instructions Manual

STEP
4 VCR Plus+ guide channel settings
CANCEL
A, Y 4 b
ENTER
SETUP
m RETURN
Set these guide channels so you can use VCR Plus+ codes for
timer recording. Before starting the settings, prepare a chart show-
ing the channels, station names, and guide channels.
e.g.,
St&Xl GUiCk? Channef
name
channel number
CBS 04 04
HBO 33 15
Nickelodeon 38 20
Look up the guide channels Write c
unnecessary
Enter channel 15 next
to Guide Channel 33.
Enter channel 20 next
to Guide Channel 38.
)wn all the stations you
for the stations in magazines. can receive.
1
Press [SETUP] to show the menus.
Press [A, v] to select "Channel" and
press [b].
3
Press [A, v] to select "VCR Plus+
CH Setting" and press [ENTER].
e.g., when the current antenna system is CATV.
4
Press [A, v] to select the guide
channel you want to set and press
PI
When'selecting the guide channel, press and hold [A, v] to
scroll the screen up and down.
5 Press [A, v] to select the channel
corresponding to the guide channel
and press [+I.
To delete a number, press [CANCEL].
Repeat steps 4 and 5 as necessary.
6
Press [ENTER].
The "Channel" screen reappears.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
VCR Plus+ and PlusCode are registered trademarks of Gem-
star Development Corporation. The VCR Plus+ system is manu-
factured under license from Gemstar Development Corporation.
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and
4,706,121