Panasonic DMR-E50 Operating Instructions Manual page 54

Recording and timer recording
Page
VCR Plus+ programming
does not work properly.
l
The guide channels are incorrect. Go to the Channel menu and correct them with "VCR
Plus+ CH Setting".
l
The clock is wrong. Go to the Set Up menu and correct it with "Clock Settings".
The unit switches to standby *The disc has run out of space. Use a disc that has enough space to record the program.
-
while making a timer record-
ing.
i
I
Timer recording does not
stop even when [W] is
pressed.
l
Press [m] and then [ENTER] within 5 seconds to turn '6" off. Recording stops.
A part or whole of a recorded
l
If there is a power failure or the plug is disconnected from the household AC outlet while
program has been lost. recording or editing, the program may be lost or the disc may become unusable.
+ We cannot offer any guarantee regarding lost programs or discs. You will have to format 34
the disc or use a new disc.
1 Discs make sounds as they rotate. This does not indicate a malfunction.
The precision parts in this unit are readily affected by the envi-
ronment, especially temperature, humidity, and dust. Cigarette
smoke also can cause malfunction or breakdown.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit's lens over time, making it
Damage requiring service-The unit should be serviced by
qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged;
(b)r%jects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked
change in performance; or
(c)The unit has been dropped or the cabinet damaged.
Servicing-Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servic-
ing to authorized servicing personnel.
3. Replacement parts-When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check-After repairs or service, ask the servicer to per-
form safety checks to confirm that the unit is in proper working
condition.
Product information
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at
l-800-21 l-7262, or e-mail consumerproducts@panasonic.com,
or web site (http://www.panasoni.com).
In Canada, contact Panasonic Canada Inc. Customer Care Cen-
tre at 1-800-561-5505, web site (www.panasonic.ca), or an
authorized Servicentre closest to you.