Table of Contents
Advertisement
3. EXTERNAL GLASS PANEL AND OVENHANDLE
Unscrew the two screws on the lower side of the door
frame to release the external panel.
4. ... then unscrew the two screws coupling the handle to
the door frame.
5. The picture shows the spacers located between the outer
panel and the door frame. Make sure to put them in the
right position when reassembling the door.
8.4.
OVEN INTERNAL ELEMENTS
(TRAY SUPPORT, LAMP, FAN
COVER, OVEN FAN...)
8.4.1.
TRAY SUPPORT
(1) Tilt the tray support by pulling it to the center of the oven
cavity and (2) slide it out in direction of the oven door.
8.4.2.
OVEN LAMP
After removing the tray support, remove the lamp cover by
levering it ob the side with a flat blade screwdriver, as shown in
the picture.
Detail of the lamp cover
17
Advertisement
Table of Contents
