Table of Contents
Advertisement
8.6.
DOOR MICROSWITCH
1. Hold the microswitch firmly and turn it 15°
counter-clockwise.
2. Then pull it out to release it from its support.
8.7.
MAIN
ELECTRONIC
AND CONTROL PANEL
1. Main elements on the power board:
1: PCB power supply
2+3: heating elements relays
4: Component connector
5: Flatcable connection with display PCB
6: Microprocessor
7: Temperature probe connector
2. REMOVEING THE POWER BOARD
Push gently backwards the plastic hooks locking the PCB
on its support, tilt it upwards and pull it out.
BOARD
3. REMOVEING THE TEMPERATURE PROBE
Disconnect the probe connector from the power board,
then move to the back of the oven.
The temperature probe is mounted on the grill heating
element flange.
Disconnect the earth wire and remove the central screws
by means of a Phillips screwdriver.
4. REMOVING THE FRONT PANEL
Remove the nuts at the sides of the oven front frame by
means of a 8mm socket spanner.
19
Advertisement
Table of Contents
