Table of Contents
Advertisement
REMOTE CONTROL
For details, see page
Downloaded From projector-manual.com Fujitsu Manuals
.
Switches between Power On and Standby.
Press this button to light up the buttons on the remote control. If the buttons are left
untouched, the light turns off in 7 seconds.
Use this button to switch the Picture Mode.
Press this button to recall a Picture Memory.
Switches the screen size.
Press this button to display the menu screen for adjusting the picture and/or the audio.
Press this button to display the Program No., input mode, and screen size status.
The status is displayed for about five seconds.
Use these buttons to select the item or adjust the value in the Menu screen.
Press this button to fix the entry in the ADJUSTMENT MENU.
Press this button to make lens shift, screen reverse and keystone adjustments.
Press this button to adjust the size and focus of the picture.
Press this button to switch through RGB1 to RGB3.
Press this button to switch through VIDEO1 to VIDEO .
Use this button to specify the length of time until the projector goes into standby.
button
E-29
(LIGHT button)
E-35
(PICTURE MODE button)
E-35
(PICTURE MEMORY button)
(WIDE button)
E-36
(Menu button)
E-38–E-53
(DISPLAY button)
E-35
(Adjustment buttons)
(Enter button)
E-38–E-53
(SET UP button)
E-35
(ZOOM/FOCUS button)
E-35
–
(RGB input mode selector button)
–
(Video input mode selector button)
(OFF-TIMER button)
E-35
E-35
E-38–E-53
E-34
E-34
E-17
Advertisement
Table of Contents
