Table of Contents
Advertisement
INFORMATION
• Receptacle
Make sure that the power cable's grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you
will need to have it replaced. Contact your dealer for more information.
• Have the display inspected and cleaned by your dealer at regular intervals.
• The liquid crystal panels are manufactured with very precision techniques resulted in 99.99% or more effective pixels. Please understand
that some panels lack 0.01% or less pixels and keep the light on at all times.
• This projector is equipped with a heat-emitting fan for prevention of increasing temperature inside during operation. Note that heated air
blows out of the fan.
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for
more information.
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that
the power indicator lamp flashes red or green.
• The ventilation should not be impeded by covering the ventilation openings with items , such as newspapers , table-cloths, curtains,etc.:
– no naked flames sources , such as lighted candles, should be placed on the apparatus:
– no object filled with liquids, such as vases, shall be placed on the apparatus.
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then contact your dealer.
• Install the display in a location close to a main power supply outlet, and where the emergency stop button can be easily reached.
Note
• Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
• For clarity of explanation, the devices, accessories, etc. depicted in the photographs and illustrations included herein may differ from the actual ones
in some way or other.
E-4
Downloaded From projector-manual.com Fujitsu Manuals
Advertisement
Table of Contents
