Table of Contents
Advertisement
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
WHEN OUTPUTTING AUDIO SIGNALS TO AN AUDIO AMPLIFIER
• Connect the audio signal cables to the digital output and the analog audio output terminals.
* Connect the audio signal to the digital audio output terminal and analog audio output terminal. For switching over the digital audio output
terminal to the analog audio output terminal, see the audio input selection (page E-50).
* The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
E-28
Downloaded From projector-manual.com Fujitsu Manuals
To digital audio input
To analog audio input
To analog audio output
Rear side of AV Selector
To digital audio output
Advertisement
Table of Contents
