Configuring The History Setting Function; Configuration Using The Web Page; Establishing A Configuration Environment; Accessing The Web Configuration Page - Huawei eSpace 7810 User Manual

Huawei IP Phone eSpace 7810
User Manual

3.1.12 Configuring the History Setting Function

After you enable the history setting function,eSpace 7810 saves all call records.
To configure the history setting function, proceed as follows:
1.
2.
3.
4.

3.2 Configuration Using the Web Page

3.2.1 Establishing a Configuration Environment

Before accessing the Web configuration page, proceed as follows to establish a configuration
environment and obtain eSpace 7810's IP address.
1.
2.
3.

3.2.2 Accessing the Web Configuration Page

To access the Web configuration page, proceed as follows:
1.
2.
3.
Issue 01 (2011-09-07)
Access the Features page.
Select [History Setting] and press the OK key.
Press the right and left keys to enable or disable the History Setting function.
Press the OK key.
Obtain a PC that meets the following requirements:
Installs Ethernet adapters and supports TCP/IP.
−
− Runs the Window 98 or later operating system.
− Installs a Web browser such as Microsoft Internet Explorer 6.0 or later, Firefox, and
Google.
− Supports the resolution 800 x 600 or higher.
Press the OK key on eSpace 7810 to obtain the IP address.
If the eSpace 7810's IP address cannot be obtained, contact the system administrator.
Connect eSpace 7810 and the PC to networks where they can communicate with each
other.
You can connect eSpace 7810 and the PC to a Hub or a switch. If there is no Hub or
switch, connect the PC to the PC port on eSpace 7810.
Start the Web browser on the PC.
Enter the eSpace 7810's IP address in the address box, and press Enter.
Enter the user name and password (both user by default) and click OK, as shown in
Figure 3-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring eSpace 7810
15