Huawei eSpace 7810 User Manual page 33

Huawei IP Phone eSpace 7810
User Manual
Parameter
Blind Transfer
OnHook
Attend Trans
OnHook
Transfer on
Conference Hang
up
Time Out for
Dial-now Rule
Use Logo
Text Logo
DSS Key
In the DSS Key area, you can set Line Key and Programmable Key.
Line keys
Users can also assign functions, for example, speed dial to a line key.
key settings.
Issue 01 (2011-09-07)
Description
 Indicates whether to enable the blind transfer function.

Enabled: The blind transfer function is enabled.

Disabled: The blind transfer function is disabled, and eSpace 7810
can receive calls properly.
For details about how to set call transfer, see
 Indicates whether to enable the consult transfer function.

Enabled: The consult transfer function is enabled.

Disabled: When you press the Transfer key after the call with the
third party ends, the original call cannot be transferred to the third
party. The screen showing that the original call is being held is
displayed.
For details about how to set call transfer, see
Indicates whether to retain the connection between the other two
parties in a three-party conference when the conference initiator hangs
up.
 Enabled: When a conference initiator hangs up, the other two
parties can talk normally.
 Disabled: When a conference initiator hangs up, the other two
parties' calls end automatically.
Delay of making a call automatically when the dial-now rule is used.
Indicates whether to use the logo. Only text logos are supported.
Content of a text logo.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring eSpace 7810
4.6 Call Transfer.
4.6 Call Transfer.
Figure 3-8 shows line
28