Setting Time Formats; Setting The Ring Tone; Setting The Volume - Huawei eSpace 7810 User Manual

Huawei IP Phone eSpace 7810
User Manual
4.

3.1.3 Setting Time Formats

eSpace 7810 allows users to set time and date formats as required. To set time and date
formats, proceed as follows:
1.
2.
3.
4.
5.

3.1.4 Setting the Ring Tone

To set the ring tone, proceed as follows:
1.
2.
3.
4.
If you want to cancel the setting, press the X key to return to the previous menu.

3.1.5 Setting the Volume

eSpace 7810 allows you to adjust the volume of the handset, speaker, headset, and ring tone.
To adjust the volume in the standby state, proceed as follows:
1.
2.
3.
4.
If you want to cancel the setting, press the X key to return to the previous menu.
Issue 01 (2011-09-07)
To enable daylight saving, you must manually set related parameters on the Web page.
details about these parameters.
− Manual Setting
Use navigation keys and digital keys to manually set the time and date.
− DHCP Time
To enable DHCP time, use the left and right keys. After obtaining time offset from the
DHCP server and UTC time from the NTP server, eSpace 7810 calculates the actual
time.
To make DHCP time take effect, configure that eSpace 7810 obtains the IP address in DHCP mode,
enable DHCP time, and use SNTP to obtain UTC time.
Press the soft key Save.
Access the Basic Settings page.
Select [Time & Date] and press the OK key.
Select [Time & Date] and press the OK key.
Select [Clock] and use the left and right keys to switch between time formats 24 Hour
and 12 Hour.
Press the OK key.
Access the Basic Settings page.
Select [Ring Tone] and press the OK key.
Use the up and down keys to select a ring tone.
Press the OK key.
Access the Basic Settings page.
Select [Phone Volume] and press the OK key.
Select an object, press the OK key, and use the volume adjustment bar or left and right
key to adjust the volume.
Press the OK key.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring eSpace 7810
Table 3-5 lists
12