Table of Contents
Advertisement
Huawei IP Phone eSpace 7870
User Manual
4.
3.1.3 Setting Time and Date Formats
eSpace 7870 allows users to set time and date formats as required. To set time and date
formats, proceed as follows:
1.
2.
3.
4.
5.
3.1.4 Setting the DHCP Time
Enable DHCP time, after obtaining time offset from the DHCP server and UTC time from the
NTP server, eSpace 7870 calculates the actual time.
1.
2.
3.
4.
3.1.5 Setting the Ring Tone
To set the ring tone, proceed as follows:
1.
2.
3.
4.
3.1.6 Setting the Volume
eSpace 7870 allows you to adjust the volume of the handset, speaker, headset, and ring tone.
If you want to cancel the setting, press the soft key Back to return to the previous menu.
During a conversation, the volume adjustment bar is used to adjust the volume of the current
answer mode (handset, speaker, or headset).
Issue 01 (2012-06-20)
To enable daylight saving, you must manually set related parameters on the Web page.
details about these parameters.
−
Manual Setting
Use navigation keys and digital keys to manually set the time and date.
Press the soft key Save.
Access the Basic Settings page.
Select [Time & Date Format] and press the OK key.
Select [Clock] and use the left and right keys to switch between time formats 24 Hour
and 12 Hour.
Select [Date Format], and use the left and right keys to switch among seven date
formats.
Press the soft key Save.
Access the Basic Settings page.
Select [DHCP Time] and press the OK key.
Use the left and right keys to enable DHCP time.
To make DHCP time take effect, configure that eSpace 7870 obtains the IP address in DHCP mode,
enable DHCP time, and use SNTP to obtain UTC time.
Press the soft key Save.
Access the Basic Settings page.
Select [Ring Tone] and press the OK key.
Use the up and down keys to select a ring tone.
Press the soft key Save.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring eSpace 7870
Table 3-8
lists
14
Advertisement
Table of Contents
