Table of Contents
Advertisement
Huawei IP Phone eSpace 7870
User Manual
4.8 Three-Party Conference
To establish a three-party conference, use the conference key. In addition to the Conference
key, you can assign the conference function to a DSS key. For details, see DSS Key.
1.
2.
3.
4.
4.9 BLF Function
After the BLF function is enabled for eSpace 7870, you can press the corresponding DSS key
to check the status of the monitored phone. You can press this key to directly make a call to
the specified number.
Only administrators can configure accounts for eSpace 7870 when assigning the BLF function.
For details about how to assign the BLF function to a DSS key, see
For details about account status, see contents in Table
4.10 SCA Function
After a line of the manager's phone is bound to a line of the secretary's phone, all calls to the
manager will be connected to the secretary's phone at the same time. The secretary determines
whether to transfer the call to the manager.
Assume that manager A's phone has two lines. LINE 1 is bound to LINE 1 of secretary B's
phone, and LINE 2 is a private line. The following describes the manager and secretary
function's process.
1.
2.
3.
4.
5.
Issue 01 (2012-06-20)
User A is talking with user B. User A presses the Conference key. User B is held, and
user A hears the dial tone.
User A dials user C's number and presses the soft key Send.
When user C picks up the phone, user A only talks with user C. To establish a
three-party conversation, user A presses the Conference key again.
When user A hangs up the phone, the other two parties' conversation ends automatically.
If Transfer on Conference Hang up is set to Enabled, the other two parties' conversation continues
when user A hangs up the phone. The default value of Transfer on Conference Hang up is Disabled
for eSpace 7870. For details, see contents in
For details on how to configure the manager and secretary service, see the Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803x Administrator Guide or contact the administrator.
Customer C calls manager A.
The phone of secretary B rings. The LINE 1 indicator on both manager A's phone and
secretary B's phone blinks.
Secretary B presses the LINE1 key and answers the call.
Secretary B presses the LINE2 key and enters the number of the manager A's private line
to call manager A.
The call between secretary B and customer C is held.
Manager A presses the LINE2 key and answers the call from secretary B.
Manager A presses the LINE1 key and talks with customer C.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table
3-9.
2.3.2
Indicators.
4 Using eSpace 7870
3.2.7 DSS
Key.
59
Advertisement
Table of Contents
