Flexible Recording Mode (Fr); One Touch Recording-Specify A Time To Stop Recording - Panasonic DMR-E60 Operating Instructions Manual

Flexible recording mode (FR)

[RAM] [DVD-R]
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
1
While stopped
Press [F Rec] (34).
FLEXIBLE RECORDING
Recording in FR mode
Maximum rec. time 1 Hour 23 Min.
Set rec. time 1 Hour 23 Min.
Start Cancel
SELECT
RETURN
ENTER
Press [3, 4, 2, 1] (10) to set the recording time.
2
3
To start recording
Press [3, 4, 2, 1] (10) to select "Start" and press
[ENTER] (10).
≥Recording starts.
For your reference
≥Press [STATUS] (15) during recording to show the remaining
time.
DVD-RAM
REC 83
ARD
LR
≥It is not possible to change channel or recording mode while
flexible recording is paused.
≥Recording time reduces if you repeatedly pause recording.
Recording television programmes (continued)
One Touch Recording—Specify a time to
stop recording
[RAM] [DVD-R]
Main unit only
This is a simple way of making timer recordings when you are in a
hurry or before you go to bed. You can set the time up to 4 hours in
advance.
While recording
Press [¥, REC] (31) on the main unit to select the
recording time.
The time increases as illustrated each time you press the button.
The counter decreases in 1-minute units after you set a time. You
can change the time again with the same operation.
When the time you set is reached, recording stops and the unit
switches to standby.
Unit's Display
(Counter) # 30 # 60 # 90
^ 240 ! 180 ! 120 !}
(2)
(2) Shows recording will stop in 30 minutes
ªTo cancel
During recording, press [¥, REC] (31) until the counter appears.
≥Recording continues.
ªTo show the time remaining until recording finishes
Press [STATUS] (15) several times.
DVD-RAM
REC/OTR 30
ARD
LR
For your reference
≥This does not work during timer recordings or while using flexible
recording.
≥You cannot use the remote control to specify a time for recording
to stop.
≥Recording stops and the set time is cleared if you press [∫] (7).
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
ªTo immediately record the same TV programme that
you are viewing on the TV (Direct TV Recording)
This function allows you to immediately start recording the same
programme that you are viewing on the TV.
The programme position selected on the unit automatically
changes to that of the TV programme that you are viewing on the
TV. When you stop the recording, the unit automatically switches
back to the previously selected programme position.
Conditions for correct operation of the Direct TV Recording
function:
≥Your TV must be equipped with the [Q Link] function.
≥The unit must be connected to the TV via a fully-wired 21-pin
Scart cable.
27