Protecting Programmes/Releasing Programme Protection; Erasing Parts Of A Programme - Panasonic DMR-E60 Operating Instructions Manual

Protecting programmes/
Releasing programme protection
[RAM]
You can prevent accidental erasure of programmes by write-
protecting them.
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Insert a disc you have recorded on.
After performing steps 1 to 3 of "Erasing
programmes"(page 40), perform the following steps:
Use [3, 4] (10) to select "Protection" and press
4
[ENTER] (10).
Use [2] (10) to select "Yes" and press [ENTER]
5
(10).
Protection
Set Up Programme Protection ?
Yes No
SELECT
RETURN
ENTER
DIRECT NAVIGATOR
No. Name Date Time Title
3
01 BBC 1 Football
23/7 WED 10:00
02 BBC 1 9:00
23/7 WED Dinosaur
11:00
03 BBC 1 23/7 WED USJ
TOTAL 3 No. SELECT
0 – 9
RETURN
ENTER
The padlock mark appears.
ªTo stop partway through
Select "No" in step 5 and press [ENTER] (10).
Or
Press [RETURN] (28).
For your reference
Programmes will be erased even if they are protected if you format
the disc with DISC INFORMATION (page 38).
Protection
Cancel Programme Protection ?
Yes No
SELECT
RETURN
ENTER
DIRECT NAVIGATOR
Edit
No. Name Date Time Title Edit
1
3
01 BBC 1 23/7 WED Football
10:00
1
02 BBC 1 9:00 Dinosaur
23/7 WED
1
11:00
03 BBC 1 23/7 WED USJ
1
1
TOTAL 3 No. SELECT
0 – 9
RETURN
ENTER
The padlock mark disappears.
Using the DIRECT NAVIGATOR (continued)

Erasing parts of a programme

[RAM]
The specified parts of the programme are erased completely
when you use this procedure and cannot be retrieved. Check
the programme carefully to ensure it isn't one you want to
keep.
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Insert a disc you have recorded on.
After performing steps 1 to 3 of "Erasing
programmes"(page 40), perform the following steps:
Use [3, 4] (10) to select "Partial Erase" and press
4
[ENTER] (10).
5
Use search functions such as fast-forward and
slow-motion to find the start point of the part you
want to erase and press [ENTER] (10).
Partial
Erase
03
3
SELECT
ENTER
RETURN
6
Use search functions such as fast-forward and
1
slow-motion to find the end point of the part you
1
1
want to erase and press [ENTER] (10).
1
1
Partial
Erase
03
3
SELECT
ENTER
RETURN
Use [3, 4] (10) to select "Exit" and press [ENTER]
7
(10).
Use [2] (10) to select "Erase" and press [ENTER]
8
(10).
≥Play lists created with the erased part are also erased.
Partial erase
Remaining Time
Corresponding PLAY LIST will also be erased.
Erase
ENTER
ªTo stop partway through
Select "Cancel" in step 8 and press [ENTER] (10).
Or
Press [RETURN] (28).
ªTo erase another part of the same programme
Select "Next" in step 7 and perform step 8, then repeat steps 5–8.
For your reference
≥Use search and slow-motion to find the points.
≥You cannot specify an end point before a start point or a start
point after an end point.
≥You may not be able to specify start and end points within
3 seconds of each other.
≥You cannot specify start and end points if the picture recorded is
stilled.
≥The unit pauses play when the end of the programme is reached
during this procedure.
≥The disc's available recording time may not increase after
erasing short parts of programmes.
≥Play lists created with the erased part are also erased.
41
PLAY
Start
End
Next
Exit
0 : 00 . 05
Start End
0 : 00 . 05 – : – – . – –
Start
End
Next
Exit
0 : 10 . 15
3
Start End
0 : 00 . 05 0 : 10 . 15
0:19 SP
Cancel
SELECT
RETURN