Checking The Line Status - Panasonic KX-HDV430 Operating Instructions Manual

Checking the Line Status

Checking the Line Status
You can check the status of each line (up to 16 lines) on the display.
Checking the Line Status
[In standby mode]
1. Tap / . a "Line Status"
2. Tap / : Select the line whose status you want to check.
3. Press /[CANCEL] to end checking the line status or tap the line to perform an action. See "Line
status indication" below for details.
[During a conversation]
1. Tap "Line Status".
2. Tap / : Select the line whose status you want to check.
3. Press /[CANCEL] to end checking the line status or tap the line to perform an action. See "Line
status indication" below for details.
Note
R When a function key is assigned as a Line Status key, you can press that function key to display the
line status screen. See "Line status indication" below for details.
Line status indication
Status Display
*1
Free
In Use
Line On Hold
Incoming Call
Recall
*2
<x> In Use
*2
<x> Line On Hold
*1 The following icons are also displayed if the corresponding feature is enabled.
Icon
54
The line is idle.
Action: seize the line for dialing.
The line is on a call.
Action: none.
The line is on hold.
Action: retrieve the call on hold.
The line is receiving a call.
Action: answer the call.
The line is receiving a Hold Recall signal.
Action: answer the call.
A shared line is in use at another unit.
Action: join the call.
A shared line is on hold at another unit.
Action: retrieve the call on hold.
Call Forwarding
Do Not Disturb
Making an anonymous call
Block anonymous calls
Meaning
Meaning