Configuring Display Properties - Panasonic KX-HDV430 Operating Instructions Manual

Network Camera

Configuring Display Properties

You can adjust the brightness of the Network Camera and set up Automatic Mode.
Note
R Depending on the Network Camera, this feature may not be available.
Adjusting the Brightness of the Picture
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Camera Settings".
3. Tap "Brightness".
4. Brighter: Tap "j".
Darker: Tap "k".
Default: Tap "Reset".
Back: Tap "OK".
Note
R The range of brightness and default value depend on the Network Camera.
Automatic Mode
Note
R Depending on the Network Camera, this feature may not be available.
Auto Pan
The Network Camera can be set to pan horizontally (left–right) repeatedly over its entire viewing range.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Camera Settings".
3. Tap "Auto Mode".
*1
4. Tap "Auto Pan".
*1 To cancel Automatic Mode, tap "Off". a "OK"
Preset Sequence
You can have the Network Camera display multiple preset viewing positions in a repeating cycle.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Camera Settings".
3. Tap "Auto Mode".
4. Tap "Preset Sequence".
*1 To cancel Automatic Mode, tap "Off". a "OK"
Automatic Tracking
You can have the camera automatically follow a moving object.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Camera Settings".
60
a "OK"
*1
a "OK"