Panasonic KX-HDV430 Operating Instructions Manual page 77

Connections (including optional KX-HDV20)
Connect the Ethernet cable, the Handset Cord and the AC adaptor (Option) to the unit.
*1 Connection cable
Connect the connection cable as shown in the illustration.
*2 PoE HUB
*3 Optional AC adaptor
*4 Optional EHS headset
For up-to-date information about EHS headsets that have been tested with this unit, refer to the
following web site:
http://www.panasonic.net/pcc/support/sipphone/
*5 Optional headset
For up-to-date information about headsets that have been tested with this unit, refer to the following
web site:
http://www.panasonic.net/pcc/support/sipphone/
R The initial setting for the IP address is "DHCP—Auto". For information about your network
environment, contact your administrator. For details, see "Network Settings", Page 91.
When selecting Ethernet cables (not included)
R Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack
when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
*1
Installation and Setup
*2
*3 *3
*4
*5
77