Panasonic KX-HDV430 Operating Instructions Manual page 75

Removing the Stand
Tilt the stand in the direction indicated while pushing the PUSH marks with both hands.
PUSH
Adjusting the Camera Angle
You can tilt the camera's angle by turning the wheel on the back of the camera.
↑ : Tilt the camera upward. To hide the camera lens, tilt the camera as far upward as possible.
¯: Tilt the camera downward.
Attaching the Optional KX-HDV20 to the Unit
The optional KX-HDV20 has 20 DSS keys, and it adds 40 function keys (20 keys ´ 2 pages) to the unit.
These keys can be used to seize a line to make or receive a call or to perform a feature that has been
assigned to the key.
1. Remove the stand from both the KX-HDV430 and KX-HDV20. See "Removing the Stand", Page 75.
2. Insert the tabs of the KX-HDV20 into the designated openings in the base, and then slide the
KX-HDV20 in the direction of the arrow.
3. Fasten the KX-HDV20 to the unit with the included screw.
4. Attach the stand to both the KX-HDV430 and the KX-HDV20. See "Attaching the Stand", Page 73.
Or, if the unit will be mounted on a wall, perform wall mounting. See "Wall Mounting", Page 79.
5. Connect the KX-HDV20 to the unit with the included cable. See "Connections (including optional
KX-HDV20)", Page 77.
PUSH
Installation and Setup
75