Setting Up Your Machine For Relayed Transmission; Programming The End Receiving Station Into Your Auto Dialer - Panasonic Panafax DX-2000 User Manual

Setting Up Your Machine for Relayed Transmission

Programming the End Receiving Station into your Auto Dialer

If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "Valid", you can enter the Relay Address
(ABBR No.) by the following procedure.
To set a One-Touch/ABBR for Relayed Transmission Request
1
FUNCTION
2
1
Ex:
3
Press a One-Touch key (01-32).
01
Ex:
4
To change the input mode (between "ENTER EMAIL
ADDRESS" and "ENTER TEL. NO."), press
5
Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations are both in
the same area, omit the Country Code and the Area Code
from the End Receiving Station. The End Receiving
Station is a local telephone number as viewed from the
Relay Station.
6
SET
7
Enter the station name by using the character keys (up to
15 characters).
R O M E
Ex:
8
SET
Continued on the next page...
7 2
SET
Relayed Transmission
1:ONE-TOUCH
2:ABBR NO.
ONE-TOUCH< >
PRESS ONE-TOUCH
<01>
ENTER EMAIL ADDRESS
<01>
.
INTERNET
ENTER TEL. NO.
<01>
3961111234
<01> ENTER NAME
3961111234
<01> ROME
3961111234
<01> RELAY ADDRESS
6
161