Table of Contents
Advertisement
For the total system to work properly via LAN, certain information and additional parameters must be set. Please
contact your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required information. After
its returned, transfer the information to the back side of the front cover for future reference and
troubleshooting.
Company Name
Address
Dept.
City
Tel. No.
(see Note 1) (see Note 2) (see Note 3) (see Note 4)
(1) IP Address:
(2) Subnet Mask:
(3) *SMTP Server Name:
(4) Default Router IP Address:
(5) Email Address:
(6) DNS Server IP Address:
(7) POP Server Name:
(8) POP User Name:
(9) POP Password:
(10) Host Name:
(11) Default Subject:
(12) Default Domain:
(13) Remote Password:
(14) Relay XMT Password:
(15) Manager's Email Address:
1.
2.
3.
4.
5.
Note:
1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP
Server Names (items 3 and 7 above). If the DNS Server is not available, change the Fax Parameter No. 161 (DNS
SERVER) to "1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of the DX-2000 can be obtained from the 2nd page of the Fax Parameter List printout,
by pressing
4. Dynamic Host Configuration Protocol (DHCP) is not supported.
Continued on the next page...
User Information
Internet Parameters (See page 41 to 45)
(16) Acceptable Domain Name(s) for Relay Transmission:
SET
6 4
FUNCTION
Pre Installation Information
State
Fax No.
or
*SMTP Server IP Address:
or
*POP Server IP Address:
6.
7.
8.
9.
10.
.
Zip Code
1
17
Advertisement
Table of Contents
