Removing the back cover
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Remove the screws that secure the back cover to the chassis.
1
M3x5 countersunk
screws(5)
3
back cover
18
Before working inside your Embedded Box
PC. For more safety best practices,
www.dell.com/
2
M3x8 screws (4) and
rubber feet (4)
4
chassis
PC.
After