Removing the heat sink
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Follow step 1 to step 6 in removing the
2
Remove the
3
Remove the
Procedure
1
Remove the screws that secure the chassis heat-sinks to the sides of the
chassis.
2
In sequential order (as indicated on the heat sink), remove the screws that
secure the heatsink to the CPU board.
Before working inside your Embedded Box
PCI/PCIe card
(if installed).
memory
module.
PC. For more safety best practices,
www.dell.com/
"back
cover".
PC.
After
99