Dell 5330dn User Manual page 21

PCL
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and font size.
Menu selection: Purpose:
PCL Sets the PCL emulation
configuration: font type, symbol
type, lines per page, and font
size.
PostScript
This menu provides you with the Print PS Error menu item.
Menu selection: Purpose:
PostScript Provides the Print PS Error
menu items.
Accessing Operator Panel Menus
1. Press Menu (
2. Press Scroll (
3. If the setting item has sub menus, repeat step 2.
4. Press Scroll (
5. Press Select (
6. If you want to move to the upper level menus, press Select (
7. Press Cancel (
Downloaded from ManualsPrinter.com Manuals
Values:
Typeface
PCL1 ~ PCL56
Symbol
ROMAN8 ~ OCR B
Point Size
4.00 ~ 999.75
(0.25 unit)
Courier
Regular, Dark
Pitch
0.44 ~ 99.99
(0.01 unit)
Lines
5 ~ 128
Values:
Print PS Error
On
Off
).
to ) to highlight the desired setting and press Select (
to ) to access the required value.
) to save the selection.
) to return to Standby mode.
Select the standard font to be
used in PCL emulation.
PCL1~PCL7's interval
l
between letters is fixed,
and PCL8~PCL45's interval
is proportional to the font
type and font size. Adjust
the font size of PCL1~PCL7
using the Pitch item, and
PCL8~PCL45 using the
Point Size item.
PCL46~PCL56's interval
l
and font size are fixed.
Selects the symbol set to be used
in PCL emulation. The symbol set
is the group of numbers, marks,
and special signs used when
printing letters. Available symbol
sets vary depending on the
Typeface setting.
By selecting between PCL8 and
PCL45 from the Typeface menu,
you can determine the font size
by setting the height of the
characters in the font.
Select the version of Courier font
to use.
By selecting between PCL1 and
PCL7 from the Typeface menu,
you can determine the font size
by setting the number of
characters that will print in one
horizontal inch of type. The
default value 10 is the best size.
Set vertical spacing from 5 to 128
lines for the default paper size.
The default number of lines may
differ according to the paper size
and printing orientation.
Select whether or not your
printer prints an error list when a
PS error occurs.
On: Prints PS 3 emulation
l
errors. If an error occurs,
the job stops processing,
the error message prints,
and the printer flushes the
job.
Off: The job is flushed
l
without an indication of
any error.
).
).