Siemens 7SG11 Manual page 138

Setting name
Gn P/F Highset2 Setting
Gn P/F Highset2 Delay
Gn E/F Charact. Setting
Gn E/F Charact.
Gn E/F Charact. Time Mult
Gn E/F Charact. Delay
Gn E/F Lowset Setting
Gn E/F Lowset Delay
Gn E/F Highset1 Setting
Gn E/F Highset1 Delay
Gn E/F Highset2 Setting
Gn E/F Highset2 Delay
Gn [SEF/REF] Current Setting
Gn [SEF/REF] 1st Time Delay
Gn [SEF/REF 2nd Time Delay
Gn [SEF/REF] Lowset Delay
Gn CB Fail Time Delay1
Gn CB Fail Time Delay2
Gn P/F CB Fail Setting
Gn E/F CB Fail Setting
Gn SEF CB Fail Setting
Gn CT Failure Setting
Gn CT Failure Delay
Gn Relay Reset Delay
Output Relay Configuration Menu
See also Figure 2-1 on page 15 for the programming
matrix.
Setting name
Gn Prot. Healthy
Gn P/F Starter
Gn P/F Charact.
Gn P/F Lowset
Gn P/F Highset1
Gn P/F Highset2
©2010 Siemens Protection Devices Limited
Ref Applied value
2.3.2 xIn
2.3.2 sec
2.3.1 xin
2.3.1
2.3.1
2.3.1 sec
2.3.2 xIn
2.3.2 sec
2.3.2 xIn
2.3.2 sec
2.3.2 xIn
2.3.2 sec
2.4
2.4 sec
2.4 sec
2.4 sec
2.5 sec
2.5 sec
2.5 xIn
2.5 xIn
2.5 xIn
2.5.3 xIn
2.5.3 sec
2.3.3 sec
Ref Applied value
2.14.3
2.3.1
2.3.1
2.3.2
2.3.2
2.3.2
7SG11 Argus 1 Diagrams and Parameters
Setting name
Gn E/F Starter
Gn E/F Charact.
Gn E/F Lowset
Gn E/F Highset1
Gn E/F Highset2
Gn [SEF/REF] Starter
Gn [SEF/REF] Delay1
Gn [SEF/REF] Delay2
Gn [SEF/REF] Lowset
Gn Status 1
Gn Status 2
Gn Status 3
Gn Status 4
Gn Status 5
Gn Status 6
Gn Status 7
Gn Status 8
Gn Status 9
Gn CB Fail 1
Gn CB Fail 2
Gn CT Failure
Gn Counter Alarm
Gn ΣI² Alarm
Gn Power On Count
Gn Hand Reset
Min O/P Energise Time
Status Configuration Menu
See also Figure 2-1 on page 15 for the programming
matrix.
Setting name
Settings Group Select
Inverted Inputs
Gn P/F Charact. Inhibit
Gn P/F Lowset Inhibit
Ref Applied value
2.3.1
2.3.1
2.3.2
2.3.2
2.3.2
2.4
2.4
2.4
2.4
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.5
2.5
2.5.3
2.14.1
2.14.1
2.14.3
2.11
2.11 ms
Ref Applied value
2.2.1
2.11
2.3.1
2.3.2
P20008 Page 12 of 33