Setting H.323 Parameters - Huawei TE30 Quick Start Manual

HUAWEI TE30 Videoconferencing Endpoint
Parameter
Gateway
address
Click OK to save your settings. Then proceed based on your settings:

If you have set NMS server, Local IP address, Subnet mask, and Gateway address, a
dialog box is displayed. If you click Yes, the TE30 automatically attempts to obtain the NMS
server settings. After the TE30 obtains the settings, it displays the conferencing screen. You do
not need to set H.323 or SIP parameters.

If you have not configured the NMS server or if the attempt to obtain the NMS server settings
times out, you must manually set the H.323 and SIP parameters to display the conferencing
screen.

Setting H.323 Parameters

11
Description
Gateway address that corresponds
to the TE30 IP address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Setting
Contact your network
administrator.
This parameter is mandatory when
Connection type is set to Static IP.
Examples:

IPv4 address: 192.168.1.1

IPv6 address:
2000:0:0:0:200:55:0:1
If the attempt to obtain the NMS
server settings fails, the screen shown
on the left is displayed. Set the H.323
parameters on this screen.
Quick Start Guide
Issue 09 (2014-01-21)